Buttonshop 2 Hole Industrial Buttons

Black

$9.99

Buttonshop 2 Hole Industrial Buttons

19mm 30L for Factory Manufacturing Automotive Chef Kitchen, Military Grade Industrial Strength Heat Resistant Non Porous Melamine Size 0.75 Inch

$9.99

Virtually Indestructible. Forged from industrial-strength melamine, these survive hundreds of harsh commercial washes without warping. They won't shatter on impact, keeping your gear securely fastened on the toughest jobs.
Heat Resistant. Engineered to withstand continuous high heat up to 248°F (120°C), they provide a critical safety advantage. Unlike standard plastics, these buttons will never melt, drip, or ignite.
Stain Repellent. The rock-hard, non-porous surface instantly blocks workplace contaminants like engine oil, grease, and food stains. They wipe clean effortlessly, keeping your uniform crisp day after day.
Military Grade. Proudly made in the USA, these use the same battle-tested material adopted by the U.S. Military in WWII. You can count on this legacy of American toughness under the most demanding conditions.
Fade Proof. Because the color is molded entirely through the material, it will never chip, peel, or wash out. This permanent finish guarantees a consistent, professional look for the full life of the garment.

Your workwear is your armor, but what happens when its weakest point—a cheap plastic button—fails you? A button that melts in an industrial dryer, cracks under pressure, or stains from a simple grease spill can ruin a perfectly good uniform. For professionals in factory manufacturing, automotive repair, and busy kitchens, button failure isn't just an inconvenience; it's a compromise on safety and professionalism.

Enter the ButtonShop 2 Hole Industrial Button: the last replacement button you'll ever need. This isn't your standard plastic fastener. It's an engineered component forged from military-grade melamine, a thermoset material that's chemically bonded under extreme heat and pressure. The result? A button with a dense, rock-solid structure that is virtually indestructible and built to outlast the garment it's sewn on.

Designed for the toughest jobs, these buttons are built to perform where others fail. Their incredible heat resistance means they laugh off high-temperature industrial laundry cycles. The non-porous surface repels everything from engine oil and solvents to kitchen splatters, wiping clean every time. For chefs, mechanics, and factory workers, this means gear that stays functional, safe, and professional-looking, shift after shift.

This isn't new technology; it's proven technology. During WWII, the U.S. Military replaced fragile ceramics with melamine for its incredible durability. They soon realized this same toughness was perfect for uniform buttons that simply would not break, even under the harshest conditions. Proudly Made in the USA, every ButtonShop button carries this legacy of American-made quality and reliability.

Stop wasting time and money replacing inferior buttons. Equip your workwear with a component that works as hard as you do. This 12-piece set of 19mm (0.75 Inch) buttons is the definitive upgrade for any professional who demands unwavering reliability from their gear. Make a small investment in performance that pays off for years to come. Choose ButtonShop and fasten your gear with confidence.

Sew the button on in any direction, such as horizontal, vertical, or criss-cross, but mix up the stitches for a stronger hold. Knot and cut the thread on the back when done. Machine wash or dry clean.

Shipping: All orders ship within 24 hours from our fulfilment center in New York City. Most orders are delivered within 5 business days.

Returns: We welcome returns, as long as buttons are unused. Return shipping responsibility of customer.

Unyielding Strength: The Industrial Melamine Advantage

Beyond Plastic: The Science of Thermoset Durability and Longevity

To fully appreciate the performance of this industrial button, it is essential to understand the fundamental material science that separates it from conventional fasteners. The generic term "plastic" encompasses a vast range of polymers with profoundly different properties. Most common buttons are made from thermoplastics, such as polypropylene or polystyrene, which are defined by their ability to be melted and reformed. This characteristic, while useful for manufacturing, is also their primary weakness; it renders them vulnerable to heat, leading to warping, softening, and structural failure. In contrast, the ButtonShop Industrial Button is crafted from melamine formaldehyde resin, a thermosetting plastic that operates on a completely different chemical principle.

Engineered for Extreme Thermal Stress

Unmatched Heat Tolerance and Inherent Flame Retardancy

The thermal performance of this button provides a dual advantage: durability under common high-heat conditions and critical safety in the face of fire hazards. Its thermoset composition allows it to operate safely and without degradation across a wide temperature range, typically specified from -30°C to +120°C (-22°F to 248°F), with some formulations withstanding up to 140°C (284°F) . This makes the button perfectly suited for the rigors of industrial laundering, autoclaving, and steam pressing, where the sustained high temperatures would cause standard thermoplastic buttons to lose their shape and integrity. While even melamine should not be subjected to extreme, prolonged heat such as in a microwave or conventional oven, its tolerance is more than sufficient for any garment care or ambient workplace condition.

Impervious to Workplace Contaminants

Comprehensive Resistance to Chemicals, Stains, and Moisture

The demanding environments of professional trades expose garments to a constant barrage of chemical and biological substances. The ButtonShop Industrial Button is engineered to be impervious to these contaminants. The key to its resilience is the hard, non-porous surface formed during the curing of the melamine resin. Unlike porous materials that can absorb liquids, leading to staining, degradation, and the harboring of contaminants, this button’s high-density surface acts as a formidable barrier. This characteristic delivers distinct, sector-specific benefits that enhance both the longevity of the garment and the safety of the wearer.

A Legacy of Reliability: Military-Specification Heritage

From Naval Decks to the Modern Workshop Floor

The exceptional durability of this industrial button is not merely a claim based on laboratory data; it is a fact supported by over 80 years of performance in the most demanding real-world applications. Its heritage can be traced directly to a critical need identified by the United States Military during World War II. At the time, the U.S. Navy was burdened with heavy, fragile ceramic tableware that was ill-suited for the harsh conditions of naval vessels. In its search for a superior alternative, it discovered melamine resin. Tableware produced from this material was a revelation: it was 80% lighter, occupied 75% less storage space, and was, for all practical purposes, indestructible.

Precision-Crafted for the Professional Trades

Application-Specific Performance for Chefs, Mechanics, and Factory Professionals

By combining its advanced material properties, the ButtonShop Industrial Button provides specialized performance benefits tailored to the demanding needs of professional trades. For chefs and kitchen staff, its thermal stability and hygienic design allow it to endure high ambient heat from ovens and grills, while the non-porous surface resists bacteria and food absorption, maintaining compliance with HACCP standards. Its chemical resistance also prevents degradation from potent sanitizers. For mechanics and tradespeople, the button’s high impact strength, scratch resistance, and resistance to oils, greases, and solvents ensure durability in abrasive or chemically harsh settings. Its flame-retardant composition adds an extra layer of protection around sparks or heat sources. In industrial and factory environments, the button’s resilience to repeated laundering, fading, and cracking provides long-term reliability, making it a secure and lasting choice for rugged workwear.

VIRTUALLY INDESTRUCTIBLE | WON'T MELT, CRACK, OR SHATTER: Forget flimsy plastic buttons that warp in the dryer or break on impact. ButtonShop buttons are forged from industrial-strength melamine, a thermoset material that laughs off abuse. For the factory professional, this means they survive hundreds of harsh industrial laundering cycles without degrading. For the mechanic, they won't shatter when bumped against a vehicle frame, ensuring your gear stays secure no matter the job.
ESSENTIAL WORKPLACE SAFETY | EXTREME HEAT & FLAME RESISTANCE: Engineered to handle continuous high heat up to 248°F (120°C), these buttons provide a critical safety advantage. For a chef working over a hot grill or a welder near sparks, this feature is non-negotiable. Unlike standard plastics that can melt and drip, causing severe burns, our melamine buttons will not ignite, offering an essential layer of protection in high-risk environments.
STAYS CLEAN & PROFESSIONAL | REPELS OIL, GREASE & GRIME: The rock-hard, non-porous surface is your best defense against workplace contaminants. For an automotive technician, this means engine oil, grease, and solvents wipe right off. For kitchen staff, it means stubborn food stains won't penetrate the surface. This superior stain resistance keeps your uniform looking crisp and hygienic, upholding a professional image day after day.
PROUDLY MADE IN THE USA | MILITARY-GRADE AMERICAN QUALITY: Trust in the quality of American manufacturing. These buttons are made in the USA from the same class of material adopted by the U.S. Military for its uniforms during WWII. This is battle-tested technology, proven to perform under the most demanding conditions without fail. When you choose ButtonShop, you're choosing a legacy of toughness and reliability you can count on.
PERMANENT, FADE-PROOF COLOR | BUILT FOR THE LIFE OF THE GARMENT: The color is molded completely through the button, not just painted on the surface. This guarantees it will never chip, peel, fade, or wash out, no matter how many times it's cleaned. For businesses managing uniforms, this means a consistent, professional appearance across your entire team for the full service life of the garment, reducing replacement costs and maintaining brand standards.